Make your personal Simple DIY Floating Cabinets in about an hour! This easy woodworking mission consists of Free plans and a video tutorial.
This straightforward tutorial will present you the right way to construct these straightforward DIY floating cabinets. Simply observe the free printable plans and how-to video by www.shanty-2-chic.com! I lastly put use to a clean wall I’ve been looking at in my lavatory for much too lengthy. I’m LOVING the way it turned out! Try our Easy methods to Construct a Floating Shelf Video! Simply click on the play button beneath!
CLICK HERE TO JUMP TO THE FREE PRINTABLE PLANS
How enjoyable are these?? I actually wished my cabinets to be thick and beefy trying. I additionally wished them to be tremendous sturdy in case a sure 2 12 months previous decides to make use of them as a ladder. It can occur. This design does each!
Simple DIY Floating Cabinets Tutorial and Plans
This can be a nice newbie mission… Quite simple cuts and meeting! Let’s get began!
Provides
Provide Listing for 3 Cabinets
- 1 – 1″ x 10″ x 8′ pine boards or frequent boards
- 2 – 2″ x 3″ x 8′ pine boards or frequent boards
- 1/4″ hardwood plywood materials – I purchased a 4′ x 4′ sheet and had Dwelling Depot rip mine into 9.25″ strips.
- 3 – 1″ x 4″ x 6′ pine boards or frequent boards
- brad nailer
- Kreg Jig
- 2.5″ pocket gap screws
- 3.5″ torx or wooden screws
- Gorilla Wooden Glue
Instruments:
The price of wooden for all 3 cabinets was round $45 making these dangerous boys $15 a bit for wooden… Yup. I like them much more now.
Step 1: Reduce the Lumber
Begin by making your cuts. (Watch our How to Use a Miter Saw video HERE) Every shelf may have a body that you’ll construct first. The again of the body that’s connected to your wall will probably be a 2×3 lower at 32″. Then, every shelf may have 3 brackets which might be every 7.75″ lengthy.
Step 2: Drill Pocket Holes
I used my Kreg Jig pocket gap jig so as to add 1.5″ pocket holes on one finish of every of the brackets. This software is the bomb. It can make your initiatives a lot simpler to assemble and in addition make them a lot stronger. In case you are utilizing the K3 or K4 mannequin proper now, I completely recommend testing the K5. I simply upgraded to that one and LOVE each little factor about it! Smartest thing ever.
That is how I lined up the brackets to make the 2 pocket holes…
Step 3: Connect the Brackets
Subsequent I connected my brackets utilizing 2.5″ pocket gap screws. I did add some Gorilla wooden glue to every of the items of wooden as nicely to make it additional sturdy.
Step 4: Mounting the Shelf Help to the Wall
That’s it for the frames! Now to deliver them inside and fix them to your wall. The very first thing it would be best to do is mark the place your studs are. The simplest method to do that is through the use of a stud finder. That is the stud finder I take advantage of.
It’s a easy little software that you simply run alongside the wall and it beeps when it finds a stud.
I held every body as much as the wall and marked on the body the place my studs could be. Then I used my Ryobi drill to pre drill 2 holes the place every stud lined up. This retains the wooden from splitting once you connect it.
You should use your drill on this subsequent half, however I selected to make use of my influence driver. Guys… This is sort of a drill that does all of the be just right for you. When you have a battery, the software solely prices $69 and you’ll be amazed at how usually you employ it over your drill for driving.
I selected to make use of 3 1/2″ torx screws to connect every of my frames. You can even use wooden screws. Right here it’s after I connected it to the wall…
You may see the place I drilled straight by the again of the body and into the wall.
Right here they’re all 3 up and able to go!
Step 5: Attaching the Prime and Backside Items
Subsequent, I added my backside 1/4″ hardwood plywood. I had Dwelling Depot rip my sheet all the way down to 9.25″ strips and I lower each at 32″. I connected them to the bottom of the body utilizing wooden glue and 1 1/4″ brad nails. I used my cordless Ryobi AirStrike nailer on this half. Can I let you know how superior cordless instruments are… Particularly for indoor initiatives like this one! Saved me a ton of time and trouble.
After including that I moved to my prime piece. I used 1×10 board on this half. Every one was lower 32″ lengthy and I connected them utilizing wooden glue and 1 1/4″ brad nails with my nail gun.
Step 6: Including Trim to the DIY Floating Shelf
Your closing step will probably be trimming all of it out! I used 1 x 4″ choose pine on this half, however you too can use whitewood. I like utilizing whitewood as a result of it’s cheaper, however I had a tough time discovering sufficient straight ones that day, so I went for the choose.
Begin by reducing your aspect items. Mine have been every 9 1/4″ lengthy. I connected them utilizing 1 1/4″ brad nails and glue.
And now for the entrance of the shelf! It would be best to measure for precise on yours, however it is going to be someplace round 33.5″ lengthy. I connected mine the identical method utilizing glue and brad nails.
Step 7: Ending the Floating Cabinets
As soon as I had all 3 executed I taped them off with painter’s tape and used wooden filler to fill all of my nail holes.
I used this wood stain to stain mine. You’ll find this at Dwelling Depot and I adore it! 1 hour dry time similar to Rust-Oleum that’s carried elsewhere. I really discover that it dries even quicker than that.
Right here they’re drying!
You may preserve them like this or misery yours like I did! I used my Ryobi Nook Cat sander with, 120-grit sandpaper, to go over all my edges and corners. This provides it a enjoyable, classic look. I adopted up with one coat of polyurethane to guard the end. I prefer to say they appear ‘shanty’ 😉
Step 8: Easy methods to Embellish Floating Cabinets
I discovered all the lovable baskets, towels and decor at HomeGoods! LOVE that place… I at all times stroll in for one factor, and out with many extra.
What do you suppose?? I like them! I’ll make some for each room now 😉
I’d LOVE so that you can pin these Simple DIY Floating Cabinets and share them with all your pals! You guys are superior!
Thanks a lot!
~Whitney
Examine Out Our Different Free DIY Floating Shelf Plans!
We’ve got a ton of free shelf mission plans! Which one will you construct subsequent?
DIY Floating Cabinets
- 1 1x10x8 Pine or Whitewood
- 2 2x3x8 Framing Lumber
- 1 4’x4’x1/4″ Hardwood Plywood
- 3 1x4x6′ Pine or Whitewood
- 1 1/4″ Brad Nails
- 2 1/2″ Pocket Gap Screws
- 3 1/2″ Wooden Screws
- Wooden Glue